laser micro diameter measurement

Japan TAKANO detector, laser diameter is widely used in optical fiber, ceramic, electric wire, communication cable, power cable and enameled wire, aluminum pipe, steel, fiber, glass glass rods, such as plastic pipe, water pipe diameter measurement, online inspection and off-line, and can realize automatic feedback control and the online communication with computer.

Product features:

Using drift followed since the correction technology, measurement and precision is not affected by environmental light temperature, noise, measured values very stable;

Using laser protection circuit with high reliability and high stability constant speed scan motor, guarantee the high measurement precision, high stability and long service life.

Five real-time display, LED diameter with four upper and lower set display and the center location;

Analog output deviation under DC + 10 v output control voltage;

Transfinite alarm on the floor of the green LED flashing and relay output;

Small size, sampling speed, sensitivity, high precision, stable and reliable performance, no trouble back at home. 
Laser scanning, non-contact measurement, the measured object without damage; 
With PID ?

Technical parameters: LT - 3011 - m uniaxial) (LT - 3012 - m biaxial)

Measuring range: 0.2-35 mm 
Accuracy: + / - 2 microns 
Resolution: + / - 0.1 microns 
Scanning speed: 700 times/SEC 
Repeatability error: + / - 0.001 m 
Instrument installation dimensions: 283 x 80 x 45 uniaxial (mm) biaxial 265 x 232 x 45 (mm) 
Measuring position height from the ground: arbitrary 
Instrument weight: 1 kg 
Working voltage: AC90 ~ 240 v 
Ambient temperature: 50 ℃ below

日本TAKANO激光外径测量仪,广泛应用于光纤、陶瓷、电子线材、通信电缆、电力电缆、漆包线、铝塑管、钢材、纤维、玻 璃棒、塑料管、水管等的外径测量,在线检测和离线检测均可,并能实现自动反馈控制以及与电脑的联机通讯。  

高精度稳定检测-可用于军工级的品控测量

***创新技术,可测量透明物体,***小可检测0.05mm

产品特点:

      采用漂移跟随自校正技术,测量值和精度不受环境温度、杂光照度影响,测量值极稳定;

      采用高可靠激光保护电路和高稳定度恒速扫描马达,保证高测量精度,高稳定性和超长使用寿命;

      5位LED外径实时显示,带4位上下限设定显示和中心位置显示;

      模拟输出 偏差值的DC±10V以下输出控制电压;

      超限报警上下限的绿色LED闪烁和继电器输出;

       体积小,采样速度快, 灵敏,精度高,性能稳定可靠,无后顾之忧;  
       激光扫描,非接触式测量,对被测量物无损伤;   
       带PID反馈控制系统;   
       带RS232标准数据通讯接口,能与PC机或PLC进行通讯;   
       微电脑数字控制方便操作和使用简单;  
       可配备继电器偏差驱动报警功能;  
       可轻松调整实际值与显示值的误差;  
       可设定上限值/下限值报警功能。

技术参数:(LT-3011M 单轴) (LT-3012M 双轴)  
       可以测量透明产品(其它牌子做不到)
       测量范围 :0.05-35mm (其它牌子只能检测0.2mm以上 )                           
       测量精度 :±2μm  
       分辨率 :±0.1μm  
       扫描速度 :700次/秒  
       重复性误差 :±0.001m  
       仪器外型尺寸 :单轴283×80×45(mm) 双轴265×232×45(mm)  
       测量位置离地高度 :任意  
       仪器重量 :1KG  
       工作电压 :AC90~240V  
       环境温度 :50℃以下


Scan the qr codeClose
the qr code
Powered by RRZCMS