

Laser diameter detector
Japan TAKANO detector, laser diameter is widely used in optical
fiber, ceramic, electric wire, communication cable, power cable and
enameled wire, aluminum pipe, steel, fiber, glass glass rods, such as
plastic pipe, water pipe diameter measurement, online inspection and
off-line, and can realize automatic feedback control and the online
communication with computer. Product features: Using drift followed since the correction technology, measurement and
precision is not affected by environmental light temperature, noise,
measured values very stable; Using laser protection circuit with high reliability and high
stability constant speed scan motor, guarantee the high measurement
precision, high stability and long service life. Five real-time display, LED diameter with four upper and lower set display and the center location; Analog output deviation under DC + 10 v output control voltage; Transfinite alarm on the floor of the green LED flashing and relay output; Small size, sampling speed, sensitivity, high precision, stable and reliable performance, no trouble back at home. Technical parameters: LT - 3011 - m uniaxial) (LT - 3012 - m biaxial) Measuring range: 0.2-35 mm
Laser scanning, non-contact measurement, the measured object without damage;
With PID
Accuracy: + / - 2 microns
Resolution: + / - 0.1 microns
Scanning speed: 700 times/SEC
Repeatability error: + / - 0.001 m
Instrument installation dimensions: 283 x 80 x 45 uniaxial (mm) biaxial 265 x 232 x 45 (mm)
Measuring position height from the ground: arbitrary
Instrument weight: 1 kg
Working voltage: AC90 ~ 240 v
Ambient temperature: 50 ℃ below