Product features:

Using drift followed since the correction technology, measurement and precision is not affected by environmental light temperature, noise, measured values very stable;

Using laser protection circuit with high reliability and high stability constant speed scan motor, guarantee the high measurement precision, high stability and long service life.

Five real-time display, LED diameter with four upper and lower set display and the center location;

Analog output deviation under DC + 10 v output control voltage;

Transfinite alarm on the floor of the green LED flashing and relay output;

Small size, sampling speed, sensitivity, high precision, stable and reliable performance, no trouble back at home.  
Laser scanning, non-contact measurement, the measured object without damage;  
With PID ?

Technical parameters: LT - 3011 - m uniaxial) (LT - 3012 - m biaxial)

Measuring range: 0.2-35 mm  
Accuracy: + / - 2 microns  
Resolution: + / - 0.1 microns  
Scanning speed: 700 times/SEC  
Repeatability error: + / - 0.001 m  
Instrument installation dimensions: 283 x 80 x 45 uniaxial (mm) biaxial 265 x 232 x 45 (mm)  
Measuring position height from the ground: arbitrary  
Instrument weight: 1 kg  
Working voltage: AC90 ~ 240 v  
Ambient temperature: 50 ℃ below